BC Hydro claims a Mission homeowner is ultimately liable for
a fire that originated at the base of a smart meter one day
after it was installed.
A report by the Mission fire department said the blaze,
which destroyed Trish Regan’s house in the 7900-block of
Burdock Street and leaped to the roof of a neighbouring home
on June 15, originated at an insulating “lug” in the lower
left corner of the meter base. The report says the terminal,
which attached the meter base to the home, appeared cracked
and “radiated heat to combust the wall at or near the meter
base.”
The base is the mounting plate for the meter, which measures
how much electricity a home consumes during each
utility-service billing period. Electricity must pass from
the meter through the lugs to connect with the house wiring.
BC Hydro maintains the meter base is part of the house and
thus any damage or faulty wiring is the customer’s
responsibility.
Spokeswoman Cindy Verschoor said the Crown corporation has
fixed about 1,000 homes with faulty or damaged wiring before
it installed the smart meters, but residents should be
ensuring they have electricians check the wiring regularly.
“We are fixing that for the customer free of charge as long
as they give us permission,” she said. “Those are cases of a
fire risk. They are potential accidents waiting to happen.
“We’re always [doing work] on good faith that the customer
has working, functional equipment to support our
infrastructure.”
The meter bases function like household electrical sockets
and are built to withstand meters being plugged in and
pulled out multiple times, Verschoor said.
If a resident is concerned about their meter base, they can
call Hydro to come unlock the meter and remove it for about
$100, she added.
Verschoor acknowledged the technician in Regan’s case did
not see the crack when installing the smart meter at her
home, but wouldn’t speculate as to what caused the damage,
saying the issue is still under investigation.
“It’s possible there was a pre-existing condition that
wasn’t evident,” Verschoor said.
But Regan argued she had no idea she was responsible for the
fire, noting smart meters are locked in place on the base
and she has no access to them. Furthermore, Regan said the
crack could have been caused by the installer, noting that
she wasn’t home when he arrived, but her daughter witnessed
him trying three or four times to jam the meter onto the
base.
“If there’s an existing crack they’re not supposed to put a
meter on it,” she said. “I’ve lived in my house for 20 years
and the day after they put in a smart meter, it burns down.”
Regan is also increasingly frustrated by the Mission fire
department, who initially told her the fire was caused by a
crack on the base of the smart meter; it later revised its
verdict to “electrical in nature.” Her insurance company
filed a freedom of information request, which indicated the
fire did originate at the base of the
smart meter.
The blaze destroyed Regan’s home, three vehicles in her
driveway, and damaged her neighbour’s house.
The smart meter itself was eliminated as the cause of the
fire, and BC Hydro maintains it did not see any cracks when
the meter was being installed. The utility said out of the
1.5 million smart meters it has installed to date, only 250
residents have complained of faulty meter bases.
Try any
Q-Link or
cell chip
for 3 months, absolutely
RISK-FREE If you do not feel Q-Link improves your
focus, energy, or well-being, simply return it for a full
refund.
Airtube headsets have
30 a day refund.